RFI Help – Frequently Asked Questions

Frequently Asked Questions (for RFI Investigators)
What Is Your Policy Regarding Equipment Malfunction?

There is only one piece of equipment to use with RFI – the digital frequency counter, plus the software program. If problems do arise, there are some options. Basically, if your equipment is damaged in transit, we can get reimbursed through the shipping service and send you a new one once you send back the damaged counter. Each digital counter that we ship out must pass our Quality Assurance tests to ensure they are not malfunctioning or defective at the time of shipment. If it “malfunctions” or gets damaged at any time during your use, we suggest you first email ITEM and describe the nature of the problem. If the counter is under the one-year manufacturer warranty, we will likely request that you ship the counter directly to the manufacturer for repair or replacement. If a problem is identified beyond the warranty period, email ITEM and we will decide the best way to service your counter. If the counter cannot be fixed, then we can give you the “wholesale” discount on a replacement counter. This “Expressed Limited Warranty” only applies if the equipment malfunctions or is defective through no fault of your own. “Wear and tear” is not included in this “Warranty.”

What Is Meant by Any and All Discoveries, Improvements or Developments Shall Become and Remain the Intellectual Property of ITEM?

This language is from the RFI License Agreement, and its intent is as follows:

1.        The intent of this provision is to prevent people (including competitors) from purchasing RFI, and making small improvements in the data, process or method itself, and reselling it as their own technology. Since this would already be a violation of Federal Title 42 unfair competition law, and a violation of Federal Copyright and Trade Secret law, this restriction does not add anything new beyond the established requirements of law.

2.        The effect of this provision is that if you made discoveries or improvements in the actual RFI data, method or process itself, the improvements remain part of our intellectual property. This is fair, because we offer the only Aura system in the world which exposes the inner workings of the process for the benefit of serious scientists, and but for our years of hard work and many thousands of dollars in investments, you would not have the possibility to realize such improvements.

3.        ITEM has maintained full legal “Patent Priority” over competing patent applications under the requirements of Federal Patent Law. Therefore, any improvements or developments that you could possibly make would be disqualified from a patent anyway, and if you beat us to the Patent Office, the Federal District Court would invalidate your patent as a violation of our established priority. Therefore, you could not do anything with such discoveries anyway, so the provision does not add anything new beyond the established requirements of law.

4.        Our offering licenses to become a Licensed Investigator of RFI is a way for us to share our Trade Secrets and patentable process and data, without losing our intellectual property rights, so that you can benefit from the technology. This licensing system also allows us to collect questions, comments and data from our RFI Investigators, which helps us move the technology towards its ultimate patentable state, and allows us to print updates which we mail to all licensed users. Therefore, just as your contributions will help others, their contributions will help you. This is the real benefit of this provision. ITEM becomes a clearinghouse for all RFI developments and discoveries, for the benefit of all licensed users. In summary, it is like an exclusive club, sharing trade secrets, while protecting our intellectual property rights against competitors.

5.        RFI is intended to be used to help you develop other technologies, such as inventing and developing effective bioenergy generators, sound and light therapies, etc., and this provision does not in any way compromise your full rights to any other technology which you may develop, even if it uses RFI for its development or effectiveness. The restriction covers only developments in the actual Aura imaging process itself. Since you are not in the business of inventing Aura technologies, this should not apply to you or your own intellectual property, and you are free and clear of any effects of this provision.

Why Is This Method of Analysis Called “Resonant Field Imaging”?

The process is known as “Resonant Field Imaging” simply because the program is based on calculating the frequency of color in the visible light spectrum that is in resonance with the actual frequency detected during aura readings.

Do I Need to Calibrate My Frequency Counter?

No.  You can, if you wish, calibrate the counter to known frequencies by pressing the “CAL” button on the frequency counter and tuning it to the known transmitted frequency, but in general this is not necessary to maintain long-term accuracy and performance.

I am Interested in the Ultraviolet Range of Frequencies in the Aura; How Does RFI Provide This Type of Monitoring?

You can buy equipment that will allow you to read wavelengths at the visible to ultraviolet (UV) range, but these are expensive and not practical unless you have a big budget. If you are interested in obtaining equivalent UV readings from the RFI frequency counter, all you need to do is extrapolate the RFI readings up to this range through principles of harmonics and, theoretically, you would get valid UV spectra results.

How Can You Use RFI to Monitor Ambient Energies in a Room?

Reading aura colors of a room is exactly like interpreting colors around a human body for the Emotional Level (Psychological Level). For example, if there is a large zone of blue energy in a particular corner of a room, that area is or has been an area of excellent communication; if there is an orange zone, this means that the area is a center of healing energy, and so on. The Point/Object Analysis feature of the software was developed for this purpose. A custom chart or map could be developed to track the frequencies and colors detected.

How Do I Determine the Shape and Contour of the Aura Using RFI?

RFI will not give you any indication on the shape of auras, beyond the general knowledge that the Health Level exists from 0 to 4 inches from the body and the Psychological Level exists from 4 to 18 inches. To determine shape and contour, we recommend that you use dowsing rods. This method has been used for a long time, and there are many books available on it. Yet be aware of one key point – although we have discussed boundary layers of interaction between the aura and the environment, in theory there are no restrictions on the aura. All EM waves travel infinitely in theory. The aura is really only those continuously emitted EM waves in the local area around the body. Have you ever heard the esoteric principle that “all things are connected and are one?”  The auras of all things do interact and connect. In the truest metaphysical sense, there is no shape or contour to the aura, but in a practical sense, shape and contour can be determined – relatively speaking – based on finding the boundary of a certain field strength level; this can be done by dowsing rods, or perhaps even using a field strength meter.

Do Magnetic Fields Affect RFI Readings?

Electromagnetic waves consist of both electric and magnetic components. When we talk of localized electric or magnetic fields, we are talking about a single element of a dual component field. Magnetic waves or fields, in themselves, will not affect RFI readings, although the magnetic component of EM waves or fields may affect the Aura of the person you are measuring. If the magnetic waves or fields are coupled with electric fields, as is the case for localized EM fields, the strength of the electric field – along with the frequency of the EM waves within the field – are the most important considerations in whether the frequency counter will detect the EM waves. So, the magnetic field component of EM waves or fields does not directly influence RFI measurements. However, with localized EM fields in general, the stronger the magnetic field component, the stronger the electric field component, so the result is that you should be able to detect EM waves or fields that have strong magnetic components associated with them. If, on the other hand, the EM waves are not localized but instead originate from a source some distance away, the magnetic and electric field components may be “decoupled” from each other; in this case, a strong magnetic field will have a weak electric field associated with it, and you may not be able to detect the wave with the frequency counter. The interested reader should refer to advanced texts on electromagnetism for additional information.

What is the Difference Between Electromagnetic Waves and Fields?

A source or transmitter of EM waves produces an EM field; the human body, for example, is a transmitter of EM waves (through underlying torsion field bioenergies) that produces an EM field (the aura). An EM field is nothing more than an area of localized EM waves that are continuously emitted from the source, which may overlap, interfere, or otherwise combine to form a complex “mass” of EM waves that we generally call an EM field.

Do Sources of High-Strength EM Waves Like Radio Frequencies Affect the Functioning of the RFI Antenna?

Please refer to Section 5.0 of the Technical Manual. Interference can be found in one of two ways: 1) by using the filter built into the frequency counter and observing non-zero frequency readings, and 2) observing a response in the signal strength bar graph. We recommend turning off electrical appliances and devices during readings (although such waves will not generally interfere with readings). Computer emissions will also not generally interfere with measurements. If such interference is found, then you should check to see if any high-energy devices are operating (e.g., microwaves, cellular telephones, etc.) and turn them off. If you cannot identify and eliminate the source of interference, you may need to relocate to an area where the filter and signal strength bar graph does not detect interference, or in some cases may want to construct a simple shield or an antenna filter. If you continue to experience problems, ITEM staff is available for assistance. Most Investigators never have problems in this regard.

Is There a Link Between the Degree of a Person’s Spirituality and the MHz They Emit?

Generally speaking, we agree with the books on this topic. But we don’t discuss this idea too deeply in our materials because we don’t have enough scientific proof of this theory. For example, we have noticed that the higher the frequency for some colors like green, the higher the degree of, for example, love. But for other colors, like purple, the lower the frequencies the more “tranquil” or “at peace” the person is, or so it seems from our preliminary data. As we try to explain in our materials, we don’t have all the answers and we encourage RFI users to give us feedback so that we can evaluate the information in light of our findings and update our materials accordingly. If you do find out anything interesting, your sharing of that information would be invaluable to us.

Would a Faraday Cage Eliminate Some of the Extraneous “Noise” That is Sometimes Observed in the RFI Process?

A Faraday Cage would add an additional level of “protection” for RFI measurements, but it would not be needed unless a persistent source of interference was identified that could not be eliminated. If neither the filter nor the signal strength bar graph indicate interference, there would be no need for any additional protection. If persistent interference is detected, a Faraday cage would likely work, but so would less expensive alternatives such as 1) a thin sheet of metal or plastic held behind the antenna, 2) an in-line filter, and 3) finding a new location for RFI measurements.

Do You Have a Detailed Explanation of Psychometry and a Detailed Description of the Colors and Meaning Emanating from the Object Under Study?

The practice of psychometry involves “sympathetic vibration” – that is, the establishment of an energy “channel” or bridge between the object’s frequencies and the brain’s frequencies. In other words, your brain is generally trained to “step down” its frequencies so that it can come into resonance with the object’s frequencies. A good description of how to do this is explained in ITEM’s Professional Development Series in Energy Medicine. Trained psychometrists can, through sympathetic vibration, discern the origin and significant events in the history of the object, for each person who comes into contact with it leaves a residual energy imprint which people with this specialized training can read. This is a skill that must be developed – like visualizing the Aura field. However, RFI can be of some use to psychometrists – by determining the predominant frequencies surrounding the object, and entering that frequency into the Point/Object Analysis feature of the software (using the Psychological Level), you can observe the predominant energies imprinted on the object. For example, if the object’s field is “Red,” the psychometrist would get a basic idea that this object was highly desired for its materialistic value or the owner was materialistic.

I Notice That You Do Not Have Animal Body Outlines in the Software. Could You Use the Human Body Outlines for Animal Measurements?

Sure, you could use the human body outline for pets. In the future, we hope to incorporate some more body outlines for Investigators to use. What we have done is draw our own picture of the animal (or herb garden, or any object for that matter), make photocopies of it, and use the Point/Object Analysis function in the software to determine the colors after collecting the measurements. Then, we use colored pencils to color in the bioenergy regions. Of course, this way you will not get the comprehensive Aura/Brain interpretations, but you will get an excellent idea of the way bioenergies flow from the left side in and out the right side, plus you will know the interpretations for the individual regions you measure. You will, for example, be able to tell if your pet is feeling loved by seeing specific colors in the outer level of the aura.

Is RFI Able to Detect the Quantity and Quality of the Energy Field?

The RFI system definitely detects the “quality” of the energy field by revealing the objective optical spectrum color of the bioenergy field vibrations, and translating those numbers into specific Psychological and Health interpretations. The RFI system does not detect “quantity”, because the quantity of a bioenergy field is measured by its voltage or electric field strength. RFI uses a frequency counter, which has circuitry different from an ambient field strength meter. We hope that soon we can bring our RFI users a dual measurement system that can simultaneously detect frequency and electric field strength, but first we need to conduct more research into what the various field strength levels indicate in the context of frequency and color.

I Am Using a Special Chart Classifying the 365 Acupuncture Points by Color. How Does RFI Correlate to This?

There are many systems and conceptions of metaphysical analysis of chakras and acupuncture points that rely on reference colors to judge whether the condition of a person is “healthy.”  Most of these conceptions are based upon experiential explorations of many people’s bioenergy fields, and trying to identify which colors are commonly found in “healthy” subjects.

It is very important to note, however, that reference colors cannot be technically sufficient as a basis for evaluating the “health” of an individual person’s condition. Both physical and psychological health is essentially a function of a person’s adaptation to their environment. If a person lives in an aggressive environment, for example, a bioenergy field showing “openness” of channels (i.e., high receptivity to and interaction with other people’s bioenergies) would be “unhealthy,” whereas if the person lived in a loving and supportive environment, that same bioenergy configuration would be “healthy.”

Therefore, instead of using color reference charts with “default” colors considered to indicate “health,” ITEM focuses on the objective technical evaluation of the “function” of each bioenergy color. In other words, we don’t try to judge whether each color is “good” or “bad,” but simply use an objective identification of what that color bioenergy does, as a function. Then, using that technical information, we can determine whether it is healthy or not in the context of a comprehensive holistic analysis for each individual person.

This is the principle behind ITEM’s RFI system, in which a computer program uses our years of research to identify the colors, and automatically generate reports analyzing the colors in the context of both the Health and Psychological Levels of the aura. This is an important issue for all scientists to think about when attempting to interpret their findings of bioenergy colors in any specific parts of the body or bioenergy field.

What Kind of Measurements Are Possible With RFI in the Field of Materials?

It is absolutely true that physical matter (i.e., material objects) can contain great amounts of information, retained in the patterns and motions of its valence electrons. The practice of well-trained psychics “reading” such energy patterns to get that information is traditionally known as “psychometry.”

RFI was specifically engineered to allow us to read as much of this information from material objects as possible, but without having to rely on human skill or ability. Surprisingly, the information that RFI provided for various objects during initial experiments confirmed the “readings” of psychics using psychometry on the same objects, even exceeding the information that psychics could give, both in scope and detail. The electrofield analysis provided by the RFI system allows us to detect and record specific information about the history of an object, revealing 3 different perspectives: (1) the environment where the object was located or stored, and the predominant metaphysical and mental energies which describe the purpose or function of the place or environment where the object was found, (2) the psychological profile of a previous owner of the object, and (3) the inherent bioenergy properties of the object itself, such as whether it can heal, or what effect it may have on human health or psychology.

Because of the outstanding results that RFI consistently gave us with objects during our initial exploratory research, we have come to rely on it as a solid and scientific tool in archeological explorations, as well as on-site evaluations of homes and houses to analyze paranormal phenomena. RFI has also proven to be an outstanding tool for herbalism, objectively identifying both the healing properties and more metaphysical (emotional/psychological) effects of herbs.

Have You Ever Done RFI Readings While People are Given the Air of Different Aromatic Plants to Breathe?

We have done some experiments with our RFI system in evaluating the therapeutic effects, on a bioenergy level, of various aromatic beads, herbs and plant species. The findings overwhelmingly suggest that such aroma therapy can have significant beneficial results on an individual’s energy field.

What are Your Suggestions for Using RFI to Monitor Health Conditions?
Here are steps you can take to monitor health conditions over time using the bioenergy principles of RFI. Remember, RFI is not a substitute for medical advice and diagnosis, just a supplemental analysis tool (ITEM makes no medical claims whatsoever).

If you are analyzing an individual with a known medical condition:
·         Place the antenna in the Health Aura (within 4 inches of the body) at the approximate location where the health problem exists. For example, if the subject has a known condition of the liver, place the antenna (specifically the black node of the antenna) near the right side of the lower abdomen (stomach). Make sure you avoid the chakra points directly down the centerline of the front of the body if you are measuring internal organs near the front of the body. Measure the frequency of this area, and record this number and its corresponding color for future analysis in the software program. This is your baseline measurement. RFI will indicate that there may be a health problem if the color of the electrofield at this region is red or possibly gray/black; if it is not these colors, then physiological processes are likely occurring that are currently healing the affected area.

·         After the subject receives treatment, take another frequency measurement of the affected area. You should look for two things when you take measurements after a baseline measurement: 1) If the consecutive readings are higher than the previous measurements, the affected area may be improving in health, and 2) If the color of the region changes from red or orange to other colors, the area may be improving in health. For example: a physician diagnoses a man to have heart disease. You take a baseline frequency measurement at the heart of 120 MHz, corresponding to the color Orange. The man undergoes surgery, and when he has recuperated you take another measurement, and this time it is 145 MHz, corresponding to the color Green. This measurement is significant because the frequency has increased, which may indicate improved health in this area. Also, the color has changed to Green, which indicates that there may be increased circulation in that area.

If you are analyzing an individual with an unknown medical condition or monitoring for general health:

·         Make a scan of the entire Health Aura and record the frequency measurements and colors. Use the same procedure as with monitoring a known condition over time. For example, if you see decreases in frequencies over several consecutive readings (over at least a few weeks) at a particular health region, the subject may be experiencing illness in that area. Also, a potential warning sign is if you identify red or possibly gray/black in any part of the Health Aura. If you do identify red or gray/black, wait at least another day to take another measurement at that region. If it still this color, then you may want to suggest that the subject seek medical advice, regardless if there are any symptoms. Since RFI works on bioenergy principles, it may be able to detect potential health problems even before they become symptoms.

Why Do the Frequency Numbers “Jump” So Frequently?

Frequency fluctuations are simply an indicator of change. The rate of fluctuations can be an indicator of relative stability and instability. The objective, undeniable fact is that auras do change constantly, and that even the same colors resonate on different frequencies. Indeed, any conscious or unconscious thought or movement can induce a change in frequencies. Any aura system that does not give fluctuating real-time readings is hiding the true information from you, and is thus incapable of giving any truly objective information. Several years of intensive research at ITEM has proven that fluctuations are NOT caused by “interference,” and that usual “interference” (i.e., all except for certain high-strength industrial signals) does not affect or influence the RFI readings, although interference may affect a person’s aura. As long as the RFI frequency counter’s filter and signal strength bar graph does not indicate interference, you can be assured that the readings are indeed bioenergies. Furthermore, we have eliminated the need for you to become overly concerned with frequency fluctuations by identifying the third displayed frequency at the third gate speed as the predominant frequency at any particular aura region.

Why Do Some People Have Relatively Frequency Low Values and Others Have Much Higher Values?

Fundamentally, the ambient bioenergies in your environment (natural background radiation) can play a major role in the frequencies expressed in your own aura. If the ambient bioenergies are in the 300 – 400 MHz range, for example, your bioenergies can typically be in this range or slightly higher. There is indeed a question about the cause and effect basis for ambient bioenergies – on the one hand, if you and your house companions have strong energy fields (i.e., if you are strong-willed by nature, charismatic, lots of energy, etc.), you can affect the surrounding ambient bioenergies of your home. On the other hand if you are depressed, have low self-esteem, etc., you are more receptive to influences from your environment and ambient bioenergies can affect your bioenergy field. There are other considerations as well: 1) if you are very receptive to energy fields in your environment, you may find that your bioenergy field will change from one environment from another (for example your crown chakra may be 60 MHz at home and 200 MHz at work); 2) the presence or absence of other bioenergies, such as plants, can increase frequencies in a room – also, the positioning of the plants and even inanimate objects like furniture can change the frequency patterns of the room; 3) there is a possibility that the bioenergies of your hands project outward so far that the antenna will actually pick up on it. In other words, you may be reading your own outer level Aura frequencies when you are attempting to measure the ambient air of your home. A good way to test this is to put on 100% cotton gloves, wait for several minutes for the cotton to begin absorbing the bioenergy field of your hands (which causes it to retract back toward the body), then collect your measurements. If frequencies seem to be different than before, you could conclude that previously you were accidentally measuring your own energy field. Also, remember to “clear” the antenna frequently when taking measurements.

Does Anyone Offer an Attachment to the RFI Frequency Counter That Would Let Us Hook It Up Directly to the Computer?

We are experimenting with that issue right now. The reason we haven’t upgraded RFI to this level of real-time data integration up to this point is two-fold: 1) the programming task of converting digital frequency measurements, sending it through an RS-232 or USB port to your computer, and then transforming the data into useable information that can be monitored, is a very complicated task indeed although we are gradually moving in that direction; and 2) the vast majority of RFI users are happy with the process as it is because most enjoy the “user-level” control. However, we are working on a real-time data integration feature, although this may not be ready for a year or two. All licensed RFI users will have the opportunity to order upgraded models at substantial discounts.

I Took RFI Measurements Just to Check the Space Where I Would Be Working on My Clients. The Readings are Very High. Do You Have Any Idea Why It Would Be So High?

There is an eastern art called Feng Shui that involves positioning certain geometric shapes, furniture and plants in arrangements that best promote healing atmospheres. This is one possibility, that the building is first of all placed in an ideal location (there are what are called “energy nodes” all over the earth at mathematically defined locations that are known to be generators of energy), and the objects within the building are situated to promote the generation of energies. We have heard that positioning certain plants in the center of the room tends to maximize the healing atmosphere. Another possibility may be there is some type of high frequency transmitter somewhere in the building, however I doubt this is the case unless there is some type of radio or cellular transmission tower or utility company located within, on or nearby the building.

An interesting thing to test here would be measuring people while in the building, then afterwards when they are home. It would be interesting to see if the bioenergies decrease in frequencies, as they likely would, but also if the colors remain similar. If you see lots of reds and grays/blacks in the Aura while they are home, then purples, greens and blues when at the building, this would be good evidence to support that the building is a natural healing zone.

Is There a Possibility of Harmonic Waves in the House That Cause the Chaotic Mental Charges in the Brain That May Make Sensitive People Have Delusions and Insomnia?

The scientific issue here for analysis is not “fluctuation,” but rather “detection” of certain levels of frequency. The mere fact of the change in frequencies does not tell us anything that we can interpret, other than the environment is relatively unstable. The level of frequencies that you detected, however, can be interpreted. The frequency of resonance of energy fields defines their level of “informativity,” also called “infoconductivity” or rate of “energyinformatic exchange.”  Accordingly, low frequencies mean that the energy field detected has low activity, low influence on the human brain and body, and a low level of exchanging energy-information (bioenergies) between itself and humans. Conversely, high frequencies mean that the energy field has a high level of exchanging energy-information with humans, thus having a high influence on the brain and body. As you rotate 360 degrees, you eventually turn the antenna towards the beginning of a highly active energy field. We would scientifically say that you “detected” that field, and that the field has “high informativity” and thus a high influence on the brain and body. This is why you feel those sensations when you encounter it.

I Have Measured Frequencies of 80 to 110 MHz in Most Rooms of My Home, But I Have Discovered One Very Small Area Where the Frequency Jumps to 650 to 750 MHz. What Does This Mean?

It could mean a lot of different things. For example, when we have conducted paranormal investigations, we have noticed a significant “jump” in ambient frequencies when we encountered a “portal” for metaphysical entities to enter or exit our “plane” or “dimension.”   Also, if you are familiar with pyramid and geometric energies, you know that there is a “focal point” of extreme high energy in relation to surrounding areas – perhaps something in the room is acting as an energy generator for this purpose. There are unlimited possibilities, and we can help you with the interpretations of what you find, but ultimately you will learn to assess these situations and come to your own conclusions through experience (as we have). Remember, fundamentally, every number that you read on the counter is a “right” number. If the numbers “jump” frequently, this just means that there are oscillations of high “dynamic” or “unstable” energy, and that several EM waves are overlapping in the same space.

Is There an Ideal Position for the Client to Be in for Taking Readings – Standing, Sitting, or Lying Down?  I Get Very Different Readings Taken From Each Position Only Minutes Apart.

We do not recommend that the subject lie down during measurements, because the emphasis for data collection is the front and sides of the body; when lying down, it is more difficult to position the antenna properly to obtain data from the sides of the body than when the subject is standing upright or sitting on a bench seat. You should always keep the antenna positioned perpendicular to the body and parallel to the ground, with the “clip” of the antenna at the approximate mid-point of the region of interest. Changing the orientation of the antenna from perpendicular to the body to parallel will definitely introduce a greater area of the aura for the antenna to interact with, and thus influence your frequency measurements.

Do You Have Any Suggestions to Help Me Either Get Some Degree of Consistency in Readings or to Learn to Analyze the Results So I Can See Some Very Basic Level of Consistency?

We would have a number of questions for you before assessing the condition further; for example, if the frequency data does not appear to be consistent, is there some level of consistency in the colors?  Is the person in the same physical and emotional state each time?  Is it the same time of day?  Is it in the same physical location?  Are you always wearing the cotton lab coat?  Are you frequently “clearing” the antenna?  Have you observed any response with the filter on or in the signal strength bar graph?  There are far too many variables to evaluate it at this time. In at least one case, a user recorded almost every possible variable, and we were really able to gain a good understanding of what was potentially happening. What we do know is that frequencies “jump” because of specific factors or reasons, and that those reasons can be discovered with patience and experience; nothing in the universe is truly random in the sense that there is no underlying meaning. ITEM is always available to assist you in these types of conditions, but in order for ITEM to provide the maximum benefit to you, you will need to precisely define the conditions and details of your situation.

Is There Some Database of Readings You Have That I Could Refer to for Comparison So I Can Get Some Kind of Idea About What You or Other People Have Found?

We have been tracking the research of our global network of RFI Investigators for several years. The results are not generally stored in an electronic database, but rather as “case files.”  If you are interested in a particular line of research, we can put you in touch with other researchers around the world with similar interests.

I Have a Question About RFI Measurements. It Seems That the Measurements I Collect Will Vary As Much As 50 MHz Or So Depending on the Direction I Am Facing. Is This Normal?

When detecting and evaluating subtle energies, everything is very site-specific. In other words, it really depends a lot on your environment where you’re taking the readings, including the presence of people, other living things, even “metaphysical” entities, and often the presence of crystals and magnets in a room can cause such responses. Also, you must consider that your own Aura may be changing frequently, and that you are detecting the influence of your own aura on the surrounding environment.

When you detect such “variable” or relatively “unstable” responses, this is an indicator of the level of information-energy exchange in your surroundings. Sometimes you may be able to find locations that are void of anything except natural background radiation, and the frequency readings can be relatively static. Other times, when you think you are in a spot where nothing could possibly influence the readings, you may get high frequency “spikes” that seem to come from nowhere. It is then interesting to investigate the source of those energy permeations. In one case, an Investigator found that a loved one many miles away was thinking intensely about the Investigator – at the same approximate time, the Investigator started receiving readings that were unusually variable and atypical of the environment he was in. When trying to replicate this discovery, he got mixed results – sometimes the telepathic transmission caused the “excitation,” and sometimes it did not, and we are not completely sure why it did not work all the time.

The RFI system, like any other “system” such as an EEG or anything else that provides variable data feedback, requires experience and a good understanding of the fundamentals for its efficient use. We like to stress to people to take their time reading the materials before jumping into too much experimentation. Often people don’t read the materials, have certain expectations in their minds, and jump right into full readings on subjects – this often leads to confusion and sometimes disappointment because they haven’t taken the time to learn how to really use it. So I would recommend taking your time with it, and contacting ITEM with questions. Energy is perpetual and often unpredictable, so becoming wise in the efficient detection of this energy is the best thing RFI users can do before jumping in too quick (which is why we advocate that RFI users take the Professional Development Series in Energy Medicine in conjunction with learning RFI).

How Can I Use RFI for Researching Samples of Blood?

You can place samples of blood in a small petri dish (like one would use for culturing bacteria or cells), making sure of course that there is no interference in the area (using the filter and signal strength bar graph as a check). You may even want to consider placing the sample under some kind of glass or metal shielding device (as long as you leave space for the antenna to enter), as this will further help to reflect some extraneous frequencies in the room. Use the shortest antenna length. Place the petri dish containing the samples on a clean flat surface, and place the tip of the antenna as close as you can to the sample without touching it, holding the counter and antenna parallel to the flat surface. People should stand at least 6 feet away from the sample as you take the measurement, to ensure that the antenna does not pick up on their fields. We would also recommend the use of 100% cotton gloves to help absorb some of the energies radiating from your hand. Using the third gate speed setting, hold the tip of the antenna next to the sample for about 15 seconds or so to see if the readings “equilibrate” or stabilize. If the readings seem to jump frequently, this is a possible indicator of a “healthy” blood sample, as the blood is radiating a lot of information. If the readings do not stabilize, then press the Hold button after the third reading and use this frequency for input directly into the “Point/Object Analysis” function of the software (Health Level Analysis) to examine the interpretation. Make sure you record the frequency, for comparison with other samples. In general, it is fair to say that higher frequencies usually indicate a “healthier” sample because there is a higher rate of energy information exchange between the sample and the environment (i.e., blood cells and fluids exchanging oxygen and nutrients at a faster rate). This procedure can be used for other biological samples as well.